Spot laser welding machine
How to replace the xenon lamp of laser welder?
So how to replace the xenon lamp?
1. First, you need to remove the laser cavity from the inside of the machine after the machine is powered off and drained.
2. Then loosen the protective end caps at both ends of the cavity and gently take out the xenon lamp.
3. Arrange a new xenon lamp and pay attention to arrange the copper wire that needs to pass through the cavity to avoid rubbing against the inner wall of the ceramic.
4. Reinstall the protective end caps at both ends and put the cavity back into the machine.
2024年2月28日
No Comments
